TEL : 
+86-13760542818
  E-MAIL : xuhaiyan@chnyajia.com
Home » Product » Wood Heat Transfer Paper Powder Coating » Wood Finish Electrostatic Texture Epoxy Polyester Powder Coating Paint

Wood Finish Electrostatic Texture Epoxy Polyester Powder Coating Paint

Availability:
facebook sharing button
twitter sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button
  • Wood Grain

  • Powder

  • Spray

  • ISO9001, ISO14001, RoHS

  • Steel

  • Carton

wooden texture powder coating black powder coat epoxy powder coating epoxy powder coat electrostatic epoxy powder coating epoxy powder coating suppliers epoxy powder coating manufacturers What is epoxy coating used for?
Product name:                    
Powder Coatings Used Indoor(RH Series)

Introduction
The powder coating is cured by polyester resin and epoxy resin. It has excellent heat and humidity resistance,Salt fog resistance and corrosion resistance. It can be used for surface coating and decoration of various indoor appliances,furniture and hardware.

Appearance
  There are various appearance,from low gloss to high gloss.
  Special Appearance:Texture,sand,metallic or pearl,mixed color,other special appearance upon request.

Physical properties
Special gravity:1.2-1.8(depending on the gloss and color)
Distribution of powder size:100% less than 100 micron (can be adjusted by the application requirement)
Flowability: 120-140                                                        
Volatility<0.8%

Cure condition
200ºC(Object temperature)/10mins
180ºC(Object temperature)/15mins  

Typical Performance Properties

All the tests as follows are carried out on 0.8mm steel panel with the film thickness of 50-70 microns.
 

Test Item Method Standard Target
Gloss 60°Gloss Tester GB/T9754-1988 +/-  5%
Film thickness Film thickness Tester GB1764-1979 60um-70um
Adhesion Cross-cut Tester GB/T9286-1998 0 Grade
Film Hardness Film Hardness Tester(Japan) GB/T6739-1996 1H-2H
Impact Impact Tester GB/T1732-1993 50cm*kg Positive Impact(According to Gloss)
Mandrel Bend 180°Bend GB/T6742-1986 2mm-3mm
Cupping test Erichsen tester GB/T9753-1988 5mm-6mm
Color Difference Color Difference Tester GB/T11186.2-89 Dark<1.5,Light<0.5
Salt spray Salt spray Tester GB/T1771-1991 500h
Humidity Test Constant temperature and humidity GB/T1740-1979 500h,Changes<1 Grade
Bucholz Hardness Bucholz Hardness Tester GB/T 9275-1988 ≥80(Length:1.15-1.2)
Surface Visual GB/T 9761-1988 No Particle above 60um
The distribution of Particle Size Laser particle sizer / D(4,3) 35-40um



Remark:

1)Gloss: Can be adjust from 0 to 95 according to the request of customer
 2)Impact: Different gloss has different resistance capability of impact
                  Smooth:50Kg.cm,  Low gloss:40Kg.cm
 3)Mandrel Bend: The capability of bend is according to the gloss
4)The distribution of Particle: Use LS-POP(III)Laser particle sizer, it has no standard of tester method defined by the nation.
 5)Salt spray and Aging resistance: Will test according to client's request.
6)Cup-process tests may vary slightly depending on the glossy and surface effect of the product, with matte, reluster, and sand-grained cup-processes generally being slightly smaller than high-gloss powders

Average Coverage

9-12 square meters per kilogram at the film thickness of 60 microns.(at 100% powder utilization)

TGIC&Primid

Both TGIC & Primid system are available, we can supply as your requested.

epoxy powder coating

epoxy powder coat

epoxy powder coating manufacturers


Previous: 
Next: 

Related Products

PRODUCT CATEGORY

QUICK LINKS

CONTACT US

Guangdong Yajia New Energy-saving Polymer Material Co.,Ltd.
Add : Room 203 Floor 2, 5th plant in phase II of Tiegang Industrial zone, Gonghe Town, Heshan City, Guangdong Province, China
Tel : +86-13760542818
Copyright © 2024 GUANGDONG YAJIA NEW ENERGY-SAVING POLYMER MATERIAL CO., LTD. All Rights Reserved.  Sitemap