TEL : 
+86-13760542818
  E-MAIL : xuhaiyan@chnyajia.com
Home » Products » Our Category » Acrylic » Black Color Thermoplastic Acrylic Powder Coating

Black Color Thermoplastic Acrylic Powder Coating

This technology platform will meet key specifications up to AAMA 2605 and 625. These special resins now have a 10+ year track record, offering improved ultra violet stability versus Super Durable powders and improved hardness and stucco resistance versus Kynar resin based liquid and powder materials.
Availability:
facebook sharing button
twitter sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

Product name:                      
Black Color Thermoplastic Acrylic Powder Coating


Introduction
The powder coating is cured by polyester resin and epoxy resin. It has excellent heat and humidity resistance,Salt fog resistance and corrosion resistance. It can be used for surface coating and decoration of various indoor appliances,furniture and hardware.


Appearance
There are various appearance,from low gloss to high gloss.
Special Appearance:Texture,sand,metallic or pearl,mixed color,other special appearance upon request.


Physical properties
Special gravity:1.2-1.8(depending on the gloss and color)
Distribution of powder size:100% less than 100 micron (can be adjusted by the application requirement)
Flowability: 120-140                                                        
Volatility  <0.8%


Cure condition
200ºC(Object temperature)/10mins
180ºC(Object temperature)/15mins


Typical Performance Properties
All the tests as follows are carried out on 0.8mm steel panel with the film thickness of 50-70 microns.


Test Item

Method

Standard

Target

Gloss

60°Gloss Tester

GB/T9754-1988

+/-  5%

Film thickness

Film thickness Tester

GB1764-1979

60um-70um

Adhesion

Cross-cut Tester

GB/T9286-1998

0 Grade

Film Hardness

Film Hardness Tester(Japan)

GB/T6739-1996

1H-2H

Impact

Impact Tester

GB/T1732-1993

50cm*kg Positive Impact(According to Gloss)

Mandrel Bend

180°Bend

GB/T6742-1986

2mm-3mm

Cupping test

Erichsen tester

GB/T9753-1988

5mm-6mm

Color Difference

Color Difference Tester

GB/T11186.2-89

Dark<1.5,Light<0.5

Salt spray

Salt spray Tester

GB/T1771-1991

500h

Humidity Test

Constant temperature and humidity

GB/T1740-1979

500h,Changes<1 Grade

Bucholz Hardness

Bucholz Hardness Tester

GB/T 9275-1988

≥80(Length:1.15-1.2)

Surface

Visual

GB/T 9761-1988

No Particle above 60um

The distribution of Particle Size

Laser particle sizer

/

D(4,3) 35-40um



Remark:
1)Gloss: Can be adjust from 0 to 95 according to the request of customer
2)Impact: Different gloss has different resistance capability of impact
              Smooth:50Kg.cm,  Low gloss:40Kg.cm

3)Mandrel Bend: The capability of bend is according to the gloss
4)The distribution of Particle: Use LS-POP(III)Laser particle sizer, it has no standard of tester method defined by the nation.
5)Salt spray and Aging resistance: Will test according to client's request.
6)Cup-process tests may vary slightly depending on the glossy and surface effect of the product, with matte, reluster, and sand-grained cup-processes generally being slightly smaller than high-gloss powders


Average Coverage
9-12 square meters per kilogram at the film thickness of 60 microns.(at 100% powder utilization)


TGIC&Primid
Both TGIC & Primid system are available, we can supply as your requested.


Remark

TDS is for reference only, for special texture powder coating, please contact us, thanks.



Powder Coating Supplier

powder coating distributors

powder coating powder manufacturers

Previous: 
Next: 

PRODUCT CATEGORY

QUICK LINKS

CONTACT US

Guangdong Yajia New Energy-saving Polymer Material Co.,Ltd.
Add : Room 203 Floor 2, 5th plant in phase II of Tiegang Industrial zone, Gonghe Town, Heshan City, Guangdong Province, China
Tel : +86-13760542818
Copyright © 2024 GUANGDONG YAJIA NEW ENERGY-SAVING POLYMER MATERIAL CO., LTD. All Rights Reserved.  Sitemap